|
Product Details:
|
| Material: | 304, 316L | Working Pressure: | 0.1-1.0Mpa |
|---|---|---|---|
| Working Temperature: | 5-40 | Filtering Accuracy: | 1um-800um |
| Flow Rate: | 20~40 M3/h | Diameter Of Flange: | DN50mm(2 Inch) |
| Filter Bag Material: | PP/PE/Nylon | OEM: | Yes |
| High Light: | stainless filter housing,cartridge filter housing |
||
304 316L Filter Bag Housing Stainless Steel Filter Housing Water Filter Tank
General Description
Bag filter is widely used for liquid filtration, to remove different size particles from liquid, in order to achieve liquid filtration, purification, separation, recovery purposes. It consists of three parts: bag housing, supporting basket and filter bags. According to flow rate, use multiple bags in bag housing. First, the liquid enter into the housing from the inlet, which may placed in the side or on the top, and then flow into the filter bag which is braced by basket. Due to the impact pressure of fluid, the bag will extend and the liquid get evenly filtered through the bag and flow out of the outlet pipe. Impurities are trapped in the bag, the filtration process is complete. When replace or clean the bag, just simply loosen the bolt, rotary hand wheel lifting the lid, and get the bag.
Features:
1. The bag filter has large flow rate capacity, small volume and dirt holding capacity.
2. It is convenient and quick to replace the filter bag, and the filter is no-clean, saving labor and time.
3. The side leakage rate of the filter bag is small, which greatly improves the filtration quality.
4. The bag filter can withstand greater working pressure, low pressure loss, low operating cost and obvious energy saving effect.
5. Filter bag filtration accuracy has been continuously improved and has reached 0.5um.
6. The bag filter has a wide range of applications, flexible use and various installation methods.
Application:
liquid bag filter housing are widely used in the Paint, beer, vegetable oil, medicine, cosmetics, chemicals, petroleum products, textile chemicals, photographic chemicals, electroplating solution, milk, mineral water, hot solvent, latex, industrial water, syrup, resin, printing ink, industrial waste water, juice, edible oil, waxes.
Specifications
|
Standard |
GB, American Standard, German standard, Japanese standard, customized; single bag, parallel bag, multi-bag, cartridge |
|
Models |
S, T series, PBF polypropylene containers etc., |
|
Single bag flow |
6-1088T/H |
|
Working pressure |
0.1Mpa-1.0Mpa |
|
Material |
304, 316L |
|
Working temperature |
5-40℃ |
|
Filtering accuracy |
1um-800um |
|
Operation mode |
Manual or automatic control cylinder |
|
High-strength support basket |
by uniform pore size of high-strength stainless steel mesh manufacture of 3.5mm; |
|
Inlet and outlet |
1-14 inch; customized as request |
|
Inlet and outlet Location |
Side into and side out, side into and bottom out, top into and bottom out, top into and side out; customized as request |
|
Interface Type |
flange, screw thread or customized |
|
Bag model |
and non-calibration |
|
Filtration precision |
1-800um (microns) relative or absolute precision |
|
Seal ring material categories |
general nitrile rubber, Teflon, nylon, Te Fulong acid such as high temperature and high-performance specialty materials |
|
Type of bag |
pure polypropylene, polyester, wool, viscose fiber, aromatic polyamide, Teflon, nylon and other materials |
|
Structure of bag |
Single screen (surface filtration structure, pore size of 100 to 800 microns), needle felt cloth (three-dimensional structure of fluffy deep filter, pore size of 1 to 200 microns) and melt blown nonwovens (deep bed filtration structure, pore size of 1 t o 100 microns) three, and there are a variety of ~ 800 micron filtration precision to choose from, in order to meet the requirements of different production processes. Acid, high temperature and other characteristics of the bag material can be adapted to different filtered liquid chemical compatibility requirements. |
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314
