products

0.3μM Microporous High Viscosity Pleated Polyester Filter Cartridge Element

Basic Information
Place of Origin: Shanghai China
Brand Name: PULLNER
Certification: FDA
Model Number: PLM
Minimum Order Quantity: 50
Price: Negotiable
Packaging Details: Individual packing in carton box after poly bag, then 50pcs per carton. 12 cartons each pallet.
Delivery Time: 5 days
Payment Terms: T/T, Western Union, L/C, D/A, D/P, MoneyGram
Supply Ability: 1500 pcs per week
Detail Information
OD: 2.7"(68.5 Mm) Length: 5"127mm), 10",(254mm)',20"(508mm), 30"(762mm), 40"(1016mm)
Material: PP Flow Rate: 1.2 M³/h/10"
Micron: 0.3μm,0.5μm,1.0μm,3.0μm,5.0μm Connection Type: 226/222
Filtration Efficiency: >95% Max Working Temperature: 80℃
Max Forward Differential Pressure: 4 Bar/21℃, 2.4 Bar/80℃
High Light:

0.3μM pleated polyester filter cartridge

,

Microporous pleated polyester filter cartridge

,

High Viscosity pleated filter element


Product Description

Pleated polyester filter cartridge with 0.3μm/0.5μm/1μm/3μm/5μm micron in high viscosity working environment

 

General Description:

Microporous pleated filter element, the main filter material is : Polypropylene, Hydrophobic PTFE, Hydrophilic PTFE,Polyether sulfone, Nylon, etc.
Most of the raw materials are imported from abroad.Pleated filter element is a kind of deep filtration filter,it is usuaslly used as liquid overheating,clarification, filtration and terminal filter.
It has the following characteristics: the superfine polypropylene fiber membrane as the filtration medium, low pressure differential, high flux, good filtration precision, lower economic cost.
The whole structure of polypropylene, end cover, housing and center pole adopts polypropylene material; It adopts the hot melt welding process, PP and PP melt bonding,without any binder.
It has wide range of chemical compatibility, and also has a series of pore size and form a variety of interface.Material: Pleated filter, Support layer, End-cover, Inside & Outside cylinder are polypropylene.
Welding: It adopts the uniquehot melting methods, no glue, no foreign body fall off.


Typical use: Pharmaceutical, Food, Chemical, Electronics, Environmental protection, etc.
Microporous membrane pleated filter cartridge main features: High interception rate, high liquidity, low pressure differential and a wide range of chemical compatibility;
The production process adopts unique hot melting process technology, no any adhesive, no foreign body release.
It can meet the food,beverage, beer, chemical, pharmaceutical and other industries production requirements.

 

Specifications:

Item Technical Parameters
Micron 0.3μm,0.5μm,1.0μm,3.0μm,5.0μm
Filtration area 0.4-0.7m²
Filter Medium Polypropylene (PP)
Support/Drainage Polypropylene (PP)
Core/Cage/End Cap Polypropylene (PP)
Outside diameter 2.7" (68.5mm)
Max. operating differential pressure ΔP≤0.35MPa at 25℃
Max. operating differential pressure (reverse direction) ΔP≤0.28MPa at 60℃
Max. operating temperature 80℃(Stainless steel support is recommended for temperature exceeds 50℃)
Sterilization temperature 30 minute cycles @121℃
Max. operating pressure 4.0bar/21℃
2.4bar/80℃

 

Ordering info:

 

Series

 

Filter Fineness

Length Connection Type Seal Material

 

PPM

 

0030=0.3μm 05=5" C1=226/tripod E=EPDM
PPM

 

0050=0.5μm

 

10=10" C3=222/tripod S=silicone rubber
PPM

 

0100=1.0μm

 

20=20" C5=222/flat head V=fluororubber
PPM

 

0300=3.0μm

 

30=30" C6=226/flat head P=FEPsleeved
PPM

 

0500=5.0μm

 

40=40" C9=the two end  

 

Products details:

High-quality raw material with precise  designs. Pleated material combines deep filtration technology and pleated technology to promising filtration efficiency. Skeleton is using PP material with hollow-caved design, through  testing, it meet the requirements of working conditions.

 

0.3μM  Microporous  High Viscosity Pleated Polyester Filter Cartridge Element 0

0.3μM  Microporous  High Viscosity Pleated Polyester Filter Cartridge Element 1

 

Certificate document:

0.3μM  Microporous  High Viscosity Pleated Polyester Filter Cartridge Element 2

 

Our Factory:

0.3μM  Microporous  High Viscosity Pleated Polyester Filter Cartridge Element 3

0.3μM  Microporous  High Viscosity Pleated Polyester Filter Cartridge Element 40.3μM  Microporous  High Viscosity Pleated Polyester Filter Cartridge Element 5

0.3μM  Microporous  High Viscosity Pleated Polyester Filter Cartridge Element 6

0.3μM  Microporous  High Viscosity Pleated Polyester Filter Cartridge Element 7

 

FAQ

1. MOQ

As manufacturer, 1 piece is acceptable. 

2.Payment Term

Flexible payment method. We can accept L/C, T/T, Western Union, Money Gram, etc.

3.Certification:

We had ISO9001, FDA, certificate, filters test report.

4.Shipping :

Courier service: TNT, DHL, FedEx, UPS, etc.

By sea, by Air, according to customer's request.

5.Sample:

FREE, in 1-3 working days after confirmed.

6. Delivery time:

General 5-10days.

Contact Details
Kerry

Phone Number : +8615801772188

WhatsApp : +8615601905975