|
Product Details:
|
| PHFK: | High Flow Filter Cartridge | Medium: | Glass Fiber |
|---|---|---|---|
| Diameter: | 150mm | Filtration Area: | 6.6㎡ |
| Efficiency: | Beta 5000 | Micron: | 1um, 2um, 5um, 10um, 15um, 20um, 30um, 50um, 70um, 100um |
| Length: | 40"(1016mm) | Flow Rate: | 35m³/hr |
| Max. Operating Temperature: | 120℃ | Max. Operating Differential Pressure: | 3.5bar@21℃ |
| High Light: | 150mm High Flow Filter Cartridge,Microfiber pp filter cartridge,Microfiber High Flow Filter Cartridge |
||
Glass Fiber 120℃ OD150mm 99.8% efficiency PP Pleated High Flow Filter Cartridge
General information
PHFK series high flow filter cartridge is made of material: PP, Organic fiber and Glass fiber, end caps material use glassfiber reinforced PP. 150mm diameter, bigger diameter provide bigger filtration area, high dirt holding capacity and longer use life.
Material Construction
| Filter Media | PP: Deep Pleated PP/Melt PP | FO: Organic Fiber | GF: Resin Synthetic Glass Fiber |
| Support/Drainage | PP | Organic Fiber | Polyester |
| End Cap Material | Fiberglass Reinforced Polypropylene | Fiberglass Reinforced Polypropylene | Fiberglass Reinforced Polypropylene |
Flow Rate and Filtration Area
|
Size (Diameter*Length) |
Design Flow (m3/hr) |
Maximum Flow (m3/hr) |
Filtration Area (㎡) |
| 6"*20" | 15 | 40 | 2.6 |
| 6"*40" | 30 | 80 | 5.2 |
| 6"*60" | 45 | 120 | 7.8 |
Filter Performance
| Micron | 1um, 3um, 5um, 10um, 15um, 20um, 50um, 70um, 100um |
| Max. operating temperature | 82℃ |
| Max. operating differential pressure | 3.44bar@82℃ |
| Suggestion pressure for filter replacement | 2.5Bar@20℃ |
Performance comparison
Comparison chart of specific filter element number and corresponding filter footprint.
Our Customers
Factory 6200㎡
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314
