|
Product Details:
|
| Material: | Polypropylene | Length: | 254mm To 1270mm |
|---|---|---|---|
| Outside Diameter: | 64mm | Max. Operating Temperature: | 80℃ |
| Max. Operating Differential Pressure: | 4bar/21℃ | Inside Diameter: | 27mm |
| Filter Media: | Polypropylene | End Caps: | Polypropylene |
| High Light: | PLM pp melt blown filter cartridge,40" melt blown polypropylene filter,Viton melt blown filter cartridge |
||
Length 10''-40'' Material PP Micron 1.0um-150um Sealing EPDM/Silicone/Viton/PEP PLM Series Melt Blown Filter Cartridge
PLM-PP series polypropylene melt blown filter cartridge adopts the latest technology, so that the entire filter element has very hard mechanical properties, and its compression resistance is more than twice that of ordinary melt blown filter elements. It can be applied to some liquids filtration with high viscosity and high solid content. The melt blown process makes it has high dirt holding capacity and can withstand more impurities. For particulate materials, such as metallic paint, it has a good interception effect and low resistance.
PLM-NY series nylon melt blown filter cartridge is an innovative product processed through melt blown technology, and the product uses a relatively unique nylon fiber as the filter media. Provides a nylon filter cartridge with larger pore size, which has wide applicability. Coupled with the excellent chemical compatibility, it can be used in strong solvents such as benzene, toluene, and xylene. The characteristics of nylon fiber make it suitable for filtering some emulsions.
Performance Specifications
Filter Grades
1, 3, 5, 10, 20, 30, 50, 75μm
Maximum Differential Pressure
50 psid (3.45 bar)@ambient
25 psid (1.72 bar)@140°F(60℃)
Recommended Change Out Differential Pressure:
35 psid (2.4 bar)
Materials Construction
| Filter Media | PP: Polypropylene NY: Nylon |
| Cage/Core/End Cap | Center Core: Polypropylene/ Nylon/ Fiberglass reinforced polypropylene |
| Diameter | 63mm or Customization |
Performance
| Maximum Operating Temperature | 80℃ |
| Maximum Operating Differential Pressure | 4bar/21℃ |
| 2.4bar/80℃ |
Chemical Compatibility
| Material | PP | NY | Material | PP | NY |
| Benzene | NR | R | Acid | R | NR |
| Xylene | NR | R | Alcohol | R | R |
| Acetone | R | R | Fat | LR | LR |
| Trichloro ethylene | LR | R | Alkali | R | R |
R: Resist
NR:No Resist
LR: Limit resist
Ordering Information
PLM PP 0005 10 C1 S
| Series | Media | Micron | Length | End Cap Type | Seal Material | ||||
| PLM | PP=Polypropylene | 0100 | =1.0μm | 05 | =5" | C1 | =226/Spear | E | =EPDM |
| NY=Nylon | 0300 | =3.0μm | 10 | =10" | C3 | =222/Spear | S | =Silicone | |
| 0500 | =5.0μm | 20 | =20" | C5 | =222/Flat | V | =Viton | ||
| 1000 | =10μm | 30 | =30" | C6 | =226/Flat | P | =FEP | ||
| 2500 | =25μm | 40 | =40" | C9 | =DOE | ||||
| 7500 | =75μm | ||||||||
| 10000 | =100μm | ||||||||
| 15000 | =150μm | ||||||||
Contact Person: William
Tel: 86-21-57718597
Fax: 86-021-57711314
