|
Product Details:
|
| PHFL: | High Flow Pleated Filter | Material: | PP |
|---|---|---|---|
| Filtration Efficiency: | Beta 5000 | Suggestion Pressure For Filter Replacement: | 2.5Bar@20℃ |
| Flow Rate: | 110m³/hr | Filter Area: | 6.6㎡ |
| Length: | 60"(1524mm) | Maximum Operating Differential Pressure: | 3.5bar@21℃ |
| OD: | 165mm | Filtration Micron: | 1um, 2um, 5um, 10um, 15um, 20um, 30um, 50um, 70um, 100um |
| Maximum Operating Temperature: | 82℃ | ||
| High Light: | 10m2 High Flow Filter Cartridge,SWRO High Flow Filter Cartridge,10m2 prefiltration filter cartridge |
||
High Flow Filter Cartridge General information
PHFM series high flow filter cartridge adopts 165mm large diameter structure with single open end. Use advanced pleat technology, provide bigger filtration area, high flow rate and long service life. The long service life and high flow rate result in low investment and less manpower in many applications. Power Station Condensate Water Beta5000 10um 60" High Flow Pleated Filter 99.8% Efficiency. All connection use thermal welding, no any adhesive, wide range of chemical compatibility, can be applied to various fields.it can meet different flow requirement, with a wide range of chemical compatibility, can be applied to various fields.
High Flow Filter Cartridge applications:
1. Prefiltration of RO, Pretreatment of sea water desalination
2. Condensate water filtration, hot water recovery in power generation
3. API, solvents, and water filtration in BioPharm market
4. The filtration of bottled water, high Fructose, edible oil, soft drinks,and milk
5. Paints and coatings, Petrochemical, Refineries
6. Microelectronics, film, fiber and resin
High Flow Filter Cartridge Features :
1. High dirt holding capacity, longer service life
2. Less cartridge change out to save the labor cost
3. O-ring design cause no bypass to ensure the filtration efficiency
4. Easy handing result in less manpower
5. Wide chemical compatability for different applications
Material Construction
| Filter Media | PP: Deep Pleated PP/Melt PP | FO: Organic Fiber | GF: Resin Synthetic Glass Fiber |
| Support/Drainage | PP | Organic Fiber | Polyester |
| End Cap Material | Fiberglass Reinforced Polypropylene | Fiberglass Reinforced Polypropylene | Fiberglass Reinforced Polypropylene |
Filter Performance
| Micron | 1um, 3um, 5um, 10um, 15um, 20um, 50um, 70um, 100um |
| Max. operating temperature | 82℃ |
| Max. operating differential pressure | 3.44bar@82℃ |
| Suggestion pressure for filter replacement | 2.5Bar@20℃ |
Performance comparison
Comparison chart of specific filter element number and corresponding filter footprint
Flow Rate and Filtration Area
|
Size (Diameter*Length) |
Design Flow (m3/hr) |
Maximum Flow (m3/hr) |
Filtration Area (㎡) |
| 6"*20" | 15 | 40 | 2.6 |
| 6"*40" | 30 | 80 | 5.2 |
| 6"*60" | 45 | 120 |
7.8 |
1.What's about the sample cost?
We can supply the free sample, you just need to pay for the freight.
2.How about the delivery?
The goods will be arranged in 7 working days as soon as receiving the deposit or payment.
3. How is the feed back from customer ?
We have different customers from all over the world and almost everyone will do next purchase from us because of the good quality.
4. What's about the MOQ?
Our company has many kinds of filter cartridges, so every one has different MOQ, but it also can be negotiated.
5. Sample:
For our new customer, we provide free sample but buyer afford the shipping cost.
Contact Person: William
Tel: 86-21-57718597
Fax: 86-021-57711314
