|
Product Details:
|
| Material: | PES | OD: | 2.7" |
|---|---|---|---|
| Micron Rating: | 0.1um, 0.22um, 0.45um | Length: | 10", 20", 30", 40" |
| High Light: | pall capsule filter,0.45 micron filter |
||
Particulate Removal PES Pleated Water Filter for Microelectronics 0.1um 0.22um 0.45um
General Description
The PES filter adopts hydrophilic PES membrane, its asymmetric membrane structure enables the filter to greatly extend the service life of the filter while ensuring the filtration efficiency, thereby effectively saving the filtration cost of the system. Suitable for filtration of weak acids/bases and ultrapure water.
Features
Asymmetric membrane structure;
100% integrity test;
Good hydrophilicity, high throughput and uniform pore size distribution;
Asymmetric membrane structure increases the dirt holding capacity and prolongs the service life of the filter element;
Not use any adhesives and surfactants, effectively reducing the risk of precipitation;
Application
Sterilization filtration of large infusion (LVP), small injection (SVP), WFI water for injection;
Buffer filtration;
Sterilization filtration of cleaning solution and disinfectant;
Sterilization filtration of eye drops;
Sterilization filtration of biological products;
Sterilization of beer, wine, beverages, etc.
Dimensions
|
Outer diameter |
2.7" (69mm) |
|
Length |
10", 20", 30", 40" |
Material of Construction
|
Model |
PES |
|
Filter Medium |
PES |
|
Support/Drainage |
Polypropylene |
|
Center core/Outer Cage/End Caps |
Polypropylene |
|
Seals Material |
NBR, Silicone, EPDM, Viton |
Filter Performance
|
Micron |
0.1um, 0.22um, 0.45um, 0.65um |
|
Length |
10", 20" |
|
Interception rate |
100%, 107CFΜ/cm² |
|
Max. operating temperature |
80℃ |
|
Max. operating differential pressure |
0.42Mpa at 25℃ |
|
Max. operating differential pressure (Reverse direction) |
0.21Mpa at 25℃ |
|
Applicable PH |
1-14 |
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314
