|
Product Details:
|
| Material: | PES | OD: | 2.7" |
|---|---|---|---|
| Micron Rating: | 0.1um, 0.22um, 0.45um | Length: | 10", 20", 30", 40" |
| Highlight: | 0.45 micron filter,pp pleated filter cartridge |
||
0.2 Micron 20 Inch PES Membrane Filter Cartridge Pleated Filter for Final Filtration
General Description
The PES filter element is made of imported hydrophilic asymmetric PES membrane and imported non-woven fabric and mesh as the support layers. Its asymmetric membrane structure enables the filter to greatly extend the service life of the filter while ensuring the filtration efficiency, thereby effectively saving the filtration cost of the system. The filter outer cage, center core and end cap are formed by thermal welding technology, no adhesive used. They are produced in clean room, 100% integrity tested and flushed with high purity water. Suitable for filtration of weak acid/alkali liquids and high purity water.
Features
Asymmetric membrane structure;
100% integrity test;
Good hydrophilicity, high throughput and uniform pore size distribution;
Asymmetric membrane structure increases the dirt holding capacity and prolongs the service life of the filter element;
Not use any adhesives and surfactants, effectively reducing the risk of precipitation;
Application
Pharmaceutics
Food and beverage
Chemical industry
Microelectronics Filter
Dimensions
|
Outer diameter |
2.7" (69mm) |
|
Length |
10", 20", 30", 40" |
Material of Construction
|
Model |
PES |
|
Filter Medium |
PES |
|
Support/Drainage |
Polypropylene |
|
Center core/Outer Cage/End Caps |
Polypropylene |
|
Seals Material |
NBR, Silicone, EPDM, Viton |
Filter Performance
|
Micron |
0.1um, 0.22um, 0.45um, 0.65um |
|
Length |
10", 20" |
|
Interception rate |
100%, 107CFΜ/cm² |
|
Max. operating temperature |
80℃ |
|
Max. operating differential pressure |
0.42Mpa at 25℃ |
|
Max. operating differential pressure (Reverse direction) |
0.21Mpa at 25℃ |
|
Applicable PH |
1-14 |
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314
