|
Product Details:
|
| OD: | 2.7" (69mm) | Material: | PES |
|---|---|---|---|
| Micron: | 0.1um, 0.22um, 0.45um, 0.65mm, 1um | Length: | 10", 20", 30", 40" |
| High Light: | industrial filters,cartridge filter |
||
100% Integrity Test Pharmaceutical Filters PES Membrane Pleated Filters
General Description
PES membrane filter cartridge is constructed of imported polyethersulfone (PES) membrane media and nonwoven support materials. The materials of cage, core and end caps are polypropylene. Adaptors are thermally welded with media without using any glue on that, so there is no possibility to cause pollution.
Features
Excellent performance of chemical compatibility;
Hydrophilic membrane with high flow;
Non-fiber releasing according to pharmaceutics and food industry requirements;
Experience 100% integrity tested;
Flushed with ultrapure water;
FDA compliance material;
Application
Injection water, blood products, sterilizing and filtering of medicinal solvents;
Cleaning and disinfecting solution;
Sterilization filtration of biological products;
Sterilization filtration of beer, wine, beverages, etc;
Eye drop filtration;
Material of Construction
|
Model |
PES |
|
Filter Medium |
PES |
|
Support/Drainage |
Polypropylene |
|
Center core/Outer Cage/End Caps |
Polypropylene |
|
Seals Material |
NBR, Silicone, EPDM, Viton |
Filter Performance
|
Filter type |
PES Pleated Filter Cartridge |
|
Filter medium |
PES |
|
Micron |
0.1um, 0.22um, 0.45um, 0.65um |
|
Length |
10", 20" |
|
Interception rate |
100%, 107CFΜ/cm² |
|
Max. operating temperature |
80℃ |
|
Max. operating differential pressure |
0.42Mpa at 25℃ |
|
Max. operating differential pressure (Reverse direction) |
0.21Mpa at 25℃ |
|
Applicable PH |
1-14 |
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314
