High Flow Rate Pleated Filters High Temperature Water Filter PET Material 120℃
General Description
PHFLH Series High Flow Filter Cartridge is made of diameter 6"(152mm), single open end, without inner core, inside to outside flow direction. Filter body is Polyester pleated. End caps and filter layer using thermal melting welding, no any bonding agent, with a wide range of chemical compatibility. High temperature resistance, widely used in high temperature conditions.
Application:
1. Pharmaceutical industry: Pre-filtration of drugs, distilled water, biological products, various antibiotics, etc.
2. Electronics industry: Filtration of industrial water such as electronics, microelectronics, and semiconductors.
3. Food and beverage: Beer, wine, soft drinks, dairy products, bottled water, fruit wine, juice, syrup, cooking oil, etc
4. Industrial filtration: Energy, coatings, graphite, petrochemical, electroplating, mining, machining, industrial water treatment.
5. Water treatment: Drinking water, commercial water treatment, desalination
Product Features:
Single cartridge could achieve flow rate 110m3/h
Special material suitable for high temperature conditions
Stainless steel outer cage ensure high strength
Filtration systems are 50% smaller than typical size system
Inside to outside flow direction keeps all of the contamination catched.
Performance Specifications
Dimensions(nominal)
|
OD
|
6” (152mm)
|
|
Length
|
20"/40"/60"
|
Material of Construction:
|
Model
|
PHFLH
|
|
Filter Media
|
Polyester
|
|
Support/Drainage
|
Polyester
|
|
End Caps
|
Glass Fiber Reinforced Polypropylene
|
|
Seals Material
|
NBR, EPDM, Silicone, Viton
|
Filter Performance
|
Micron
|
1um, 5um, 10um, 15um, 20um, 40um, 70um, 100um
|
|
Maximum operating temperature:
|
121℃
|
|
Maximum operating differential pressure
(Inside to outside flow direction)
|
3.44bar@121℃
|
|
Suggestion pressure for filter replacement
|
2.5Bar@20℃
|
|
Suggestion design flow
|
40": 70m3/h
|
|
60": 110m3/h
|
Your message must be between 20-3,000 characters!
