|Diameter:||2.7"||Length:||10", 20", 30", 40"|
|Filter Medium:||PP||Filtration Rating:||1um, 2um, 5um, 10um, 15um, 20um, 50um, 70um, 100um|
|MOQ:||1 Piece||Delivery Time:||7-10 Days|
|Sealing Material:||Silicone/Viton/PEP/EPDM||Filter Area:||0.6㎡|
2.7" pleated filter cartridge,
20 micron pleated water filter,
PPL pleated filter cartridge
PPL Series High Rating Filter PP 2.7" Diameter 10"/20"/30"/40" Length 1micron 5micron PP material Filter Cartridge
PPL series pleated filter cartridges are made of Polypropylene (PP) membrane. The characteristics of high flow rate and high dirt holding capacity make it economical pre-filter, which is widely used in various fields such as pharmaceutical, electronics, chemical industry, food and beverage, etc. The all-polypropylene structure provides a wide range of chemical compatibility and can filter most acids, alkalis and solvents.
|Filter medium||Polypropylene (PP)|
|Core/Cage/End Cap||Polypropylene (PP)|
|Outside diameter||2.7" (68.5mm)|
|Length||10", 20", 30", 40"|
|Micron||0.1um, 0.22um, 0.45um, 1um, 2um, 3um, 5um, 10um, 20um, 30um, 60um|
|Max. operating differential pressure||ΔP≤0.35MPa at25℃|
|Max. operating differential pressure (reverse direction)||ΔP≤0.28MPa at60℃|
|Max. operating temperature||80℃(Stainless steel support is recommended for temperature exceeds 50℃)|
|Sterilization temperature||30 minute cycles @121℃|
|Max. operating pressure||4bar/21℃|
|Filter media||Polypropylene (PP)|
|Cage/Core/End caps||Polypropylene (PP)|
|Seal material||Silicone, NBR, Viton, EPDM|
* General purpose: RO Prefiltration, all kinds process water purification;
* Industrial: Water pretreatment of power plant, deionized water pre-filtration.
* Food and Beverage: Alcohol, Beverage.
* Chemical / petrochemical: Filtration of various acids, alkalis, solvents and kinds of chemicals;
* Biopharmaceutical: Filtration of pharmaceutical, biotechnology and plasma products.
Contact Person: William