|
Product Details:
|
| Diameter: | 83mm | Length: | 10" |
|---|---|---|---|
| Filter Medium: | PP/PES/PTFE | Filtration Rating: | 1um, 2um, 5um, 10um, 15um, 20um, 50um, 70um, 100um |
| MOQ: | 1 Piece | Delivery Time: | 1 Month |
| Sealing Material: | Silicone/Viton/PEP/EPDM | Filter Area: | 0.8㎡ |
| Flow Rate: | 100L/min | Max. Operating Temperature: | 80℃ |
| Highlight: | 83mm UF Membrane Filter Cartridge,0.8m2 UF Membrane Filter Cartridge,83mm pp filter cartridge |
||
83 Series Filter Cartridge
83mm Wet Process High Flow Membrane Filter Cartridge
The 83mm Wet Process High Flow Membrane Filter Cartridge is specially designed for the wet process filtration of FPD (flat-panel display) manufacturing. It has a larger filtration area and a higher flow rate, which can meet the flow demand of 120L/Min for the 5-6 generation line.
Material Construction
| Filter media |
PFL: PTFE(Hydrophobicity) PFLH: PTFE(Hydrophilic) EPS: PES HPPV: PP |
| Cage/Core/End Caps | Polypropylene (PP) |
| Seal Material | EPDM, Silicone, Viton |
Performance
| Filtration Rating | 0.05μm, 0.1μm, 0.22μm, 0.45μm, 1μm, 1.2μm, 3μm, 5μm, 10μm |
| Maximum Operating Temperature | 80℃ |
| Maximum Positive Difference Pressure |
4bar/21℃ 2.4bar/80℃ |
Biological Safety
| Every 10 inches of dissolved matter | ＜30mg |
| Endotoxin | 0.25EU/ml |
Ordering Information
83 PFL0020 10 S E
| Series | Micron | Length | End Cap Type | Seal Material | ||||
| 83 | PFL | PFLH | EPS | HPPV | 10 | =10" | C5=222/Flat | E=EPDM |
| 0020=0.2μm | 0020=0.2μm | 0005=0.05μm | 0050=0.5μm | C6=226/Flat | S=Silicone | |||
| 0050=0.5μm | 0050=0.5μm | 0010=0.1μm | 0100=1.0μm | V=Viton | ||||
| 0100=1.0μm | 0100=1.0μm | 0022=0.22μm | 0150=1.5μm | |||||
| 0300=3.0μm | 0300=3.0μm | 0045=0.45μm | 0300=3.0μm | |||||
| 0500=5.0μm | 0500=5.0μm | 0065=0.65μm | 0500=5.0μm | |||||
| 1000=10μm | 1000=10μm | 0120=1.2μm | 1000=10μm | |||||
| 2000=20μm | ||||||||
| 4000=40μm | ||||||||
| 7000=70μm | ||||||||
| 9000=90μm | ||||||||
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314
