|
Product Details:
|
| PHFK: | High Flow Filter Cartridge | Maximum Operating Temperature: | 82℃ |
|---|---|---|---|
| Filtration Micron: | 1um, 2um, 5um, 10um, 15um, 20um, 30um, 50um, 70um, 100um | Filter Area: | 6.6㎡ |
| Length: | 40"(1016mm) | Flow Rate: | 35m³/hr |
| Maximum Operating Differential Pressure: | 3.5bar@21℃ | Filtration Efficiency: | Beta 5000 |
| Material: | PP | OD: | 6" (152.4mm) |
| Highlight: | Replace park High Flow Filter Cartridge,5μm High Flow Filter Cartridge,RO sediment cartridge 5 micron |
||
CPP/CPU Filter Element OD 6" Absolute 1um 99.8% efficiency PP Pleated High Flow Filter Cartridge
General information
PHFK series high flow filter cartridge is made of 6" (152.4mm) diameter, material: PP, Organic fiber and Glass fiber, end caps material use glassfiber reinforced PP. Bigger diameter provide bigger filtration area, high flow rate, high dirt holding capacity and longer use life.
Material Construction
| Filter Media | PP: Deep Pleated PP/Melt PP | FO: Organic Fiber | GF: Resin Synthetic Glass Fiber |
| Support/Drainage | PP | Organic Fiber | Polyester |
| End Cap Material | Fiberglass Reinforced Polypropylene | Fiberglass Reinforced Polypropylene | Fiberglass Reinforced Polypropylene |
Filter Performance
| Micron | 1um, 3um, 5um, 10um, 15um, 20um, 50um, 70um, 100um |
| Max. operating temperature | 82℃ |
| Max. operating differential pressure | 3.44bar@82℃ |
| Suggestion pressure for filter replacement | 2.5Bar@20℃ |
Flow Rate and Filtration Area
|
Size (Diameter*Length) |
Design Flow (m3/hr) |
Maximum Flow (m3/hr) |
Filtration Area (㎡) |
| 6"*20" | 15 | 40 | 2.6 |
| 6"*40" | 30 | 80 | 5.2 |
| 6"*60" | 45 | 120 | 7.8 |
Performance comparison
Comparison chart of specific filter element number and corresponding filter footprint.
Our Customers
Factory 6200㎡
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314
