|
Product Details:
|
| OD: | 6" (152mm) | Product Name: | High Temperature High Flow CF |
|---|---|---|---|
| Flow Rate: | 110m³/h | Filtration Rating: | 1um, 2um, 5um, 10um, 15um, 20um, 50um, 70um, 100um |
| Length: | 60" | Material: | Polyester (PET) |
| Filtration Area: | 10.5㎡ | Support: | 304 Stainless Steel Outer Cage |
| Max. Flow Rate: | 110m³/h | Application: | High-temperature Condensate Treatment |
| Seals: | Viton/ Silicone/ EPDM | ||
| Highlight: | 110m3/h High Temperature Water Filter,110m3/h high temp water filter,152mm high temp water filter |
||
Power Plant Iron Remove High-Temperature Water Condensate water Treatment Filter cartridge
General Description
PHFLH Series High Flow Filter Cartridge is made of diameter 6"(152mm), single open end, without inner core, inside to outside flow direction. The filter body is Polyester pleated. End caps and filter layer using thermal melting welding, no any bonding agent, with a wide range of chemical compatibility. High-temperature resistance is widely used in high-temperature conditions. Reduce chemistry hold by up to 50%, Help elimate contamination-related boiler tube failures, have superior flow characteristics for a smaller footprint and lower capital costs.
High flow filter cartridge controls metal and silica solid contaminaiton in condensate water to reduce or elimnate boiler tube failures, and drastically chemical holds during start-up.
The filter housing are multi-filters, code or non code stamped, and can be applied to a wide range of flow rates, whether on startup or in continuous mode. Their design makes the element easy to service, yet the element sealing mechanism allows replacement with maximum filtration integrity.
Dimensions(nominal)
| OD | 6” (152mm) |
| Length | 60" |
Material of Construction:
| Model | PHFLH |
| Filter Media | Polyester |
| Support/Drainage | Polyester |
| End Caps | Glass Fiber Reinforced Polypropylene |
| Seals Material | NBR, EPDM, Silicone, Viton |
Filter Performance
| Micron | 1um, 5um, 10um, 15um, 20um, 40um, 70um, 100um |
| Maximum operating temperature: | Pleated polyester: 121℃ |
|
Maximum operating differential pressure (Inside to outside flow direction) |
Pleated polyester: 3.44bar@121℃ |
| Suggestion pressure for filter replacement | 2.5Bar@20℃ |
| Suggestion design flow | 40": 70m3/h |
| 60": 110m3/h |
Application:
General Purpose: RO Pre-filtration, all kinds of process water purification
Industrial filtration: Process fluid, process water, condensed water, coolant, wastewater treatment;
Food and Beverage: Process water;
Petrochemical: Various solvents, chilled water, brine filtration
Power Plant: supplementary water, condensate water, coolant
Product Features:
* Single cartridge could achieve flow rate 110m3/h
* Special material suitable for high temperature conditions
* Stainless steel outer cage ensure high strength
* Filtration systems are 50% smaller than typical size system
* Inside to outside flow direction keeps all of the contamination catched.
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314
