|Place of Origin:||Shanghai China|
|Model Number:||83 series|
|Minimum Order Quantity:||1|
|Packaging Details:||Indiviedual packing in carton box after poly bag, then 50pcs per carton. 12 cartons each pallet.|
|Delivery Time:||3-5 days|
|Payment Terms:||T/T, Western Union, L/C, D/A, D/P, MoneyGram|
|Supply Ability:||1200pcs per week|
|OD:||2.7"(68.5mm)||Length:||10", 20", 30", 40"|
|Filter Medium:||PTFE||Filtration Rating:||0.2μm,0|
|Flow Rate:||1.2m³/h/10"||MOQ:||1 Piece|
PTFE pleated sediment filter,
hydrophobic pleated sediment filter,
hydrophobic Pleated Filter Cartridge
|Filter medium||Polypropylene (PP)|
|Core/Cage/End Cap||Polypropylene (PP)|
|O-ring & gaskets seals||NBR, Silicone, EPDM, Viton|
|Micron||0.1um, 0.22um, 0.45um, 1um, 2um, 3um, 5um, 10um, 20um, 30um, 60um|
|Outside diameter||2.7" (68.5mm)|
|Max. operating differential pressure||ΔP≤0.35MPa at25℃|
|Max. operating differential pressure (reverse direction)||ΔP≤0.28MPa at60℃|
|Max. operating temperature||80℃(Stainless steel support is recommended for temperature exceeds 50℃)|
|Sterilization temperature||30 minute cycles @121℃|
|Max. operating temperature||80℃|
|Max. operating pressure||4bar/21℃|
|Hot water sterilization||85℃/30min|
PP filter cartridge is constructed of micro pore polypropylene membrane media.
The material of cage, core and end cap are polypropylene.
Adaptors are welded with cartridges without using glue.
PLZ Series Polypropylene(PP) pleated filter cartridge is made of the high accuracy PP membrane, with widely chemical compatibility, extremely low dissolved matter, and can be used in various filter situation.
* General purpose: RO Pre-filtration, all kinds process water purification;
* Industrial: Water pretreatment of power plant, deionized water pre-filtration, and filtration of plating solution
* Food and Beverage: Alcohol, Beverage, Pure water.
* Chemical / petrochemical: Filtration of various acids, alkalis, solvents and kinds of chemicals;
* Biopharmaceutical: Filtration of pharmaceutical, biotechnology and plasma products.