|
Product Details:
|
| Length: | 10", 20", 30", 40" | OD: | 2.7"(68.5mm) |
|---|---|---|---|
| Material: | PP | Filtration Rating: | 0.1um, 0.22um, 0.45um, 1um, 2um, 5um, 10um, 20um, 30um, 50um, 60um |
| Flow Rate: | 1.2m³/h/10" | Application: | Water Filtration In RO Pre-filtration |
| Product Name: | PP Filter Cartridge | Cage/end Caps: | PP |
| Removal Rating: | 99% | ||
| High Light: | 5 Micron PP Filter Cartridge,PP Pleated Filter Cartridge 10 Inches,RO Pre Filtration PP Filter Cartridge |
||
5 Micron Length 10 inches PP Filter Cartridge For Water RO Pre Filtration
General Description
PLZ Series Pleated Filter Cartridge is constructed of polypropylene material, providing micron rating from 0.1um to 60um. Has high and stable filtration efficiency, can be used for various demanding filtering environment.
Features and Benefits:
Excellent Chemical compatibility, high flow, low differential pressure, long service life;
Depth pleated membrane, can meet various application areas;
Graded pore density provide high dirt holding capacity;
Common cleaning methods available, or use high-pressure disinfection cabinet and steam sterilization;
Absolute rating, bubble point test compliance with GMP certification;
Applications:
* General purpose: RO Pre-filtration, all kinds process water purification;
* Industrial: Water pretreatment of power plant, deionized water pre-filtration, and filtration of plating solution
* Chemical / petrochemical: Filtration of various acids, alkalis, solvents and kinds of chemicals;
* Biopharmaceutical: Filtration of pharmaceutical, biotechnology and plasma products.
Specifications
| Item | Technical Parameters |
| Micron | 0.1um, 0.22um, 0.45um, 1um, 2um, 3um, 5um, 10um, 20um, 30um, 60um |
| Filtration area | 0.4-0.7m² |
| Outside diameter | 68.5mm |
| Max. operating differential pressure | ΔP≤0.35MPa at25℃ |
| Max. operating differential pressure (reverse direction) | ΔP≤0.28MPa at60℃ |
| Max. operating temperature | 80℃(Stainless steel support is recommended for temperature exceeds 50℃) |
| Sterilization temperature | 30 minute cycles @121℃ |
| Flow rate | 1.2m³/h/10" |
Material structure
| Filter Media | Polypropylene (PP) |
| Support/Drainage | Polypropylene (PP) |
| Core/Cage/End Cap | Polypropylene (PP) |
| O-ring & gaskets seals | NBR, Silicone, EPDM, Viton |
Performance
| Max. operating temperature | 80℃ |
| Max. operating pressure | 4bar/21℃ |
| 2.4bar/80℃ | |
| Mosit-heat sterilization | 121℃/30min |
| Flowing hot water sterilization | 85℃/30min |
Company profile:
Shanghai Pullner Filtration Technology Co., Ltd. was established in May 2011 with a registered capital of 26 million yuan. It has a 100,000-level purification workshop of 3,000 m² and a local thousand-level purification laboratory. It is a research and development, production and sales of microporous membrane filtration equipment, filtration system in one of the well-known enterprises.
The company's products are mainly used in Microelectronics, Fine chemicals, New energy, Seawater desalination, Biotech, Latoratory and other fields. Covering Liquid crystal panels, Semiconductor chips, High-purity chemicals, Raw materials, Condensate filtration, Reclaimed water reuse more than a dozen industries.
Other product:
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314
