DN25 Single Round Stainless Steel Filter Housing GMP Standard

Basic Information
Place of Origin: Shanghai China
Brand Name: PULLNER
Certification: ISO9001
Model Number: L-SGF
Minimum Order Quantity: 1
Price: Negotiable
Packaging Details: After plastic wrap wooden case
Delivery Time: 15-30 working days
Payment Terms: T/T, L/C, , D/P, D/A, Western Union, MoneyGram
Supply Ability: 100pcs per month
Detail Information
Material: 304, 316L Polish Type: Mirror Polish Or Internal Electro-polished
Surface Option: Internal Ra:0.3um/ External Ra:0.4um Max. Operating Pressure: 0.6MPa
Max. Operating Temperature: 135℃/ Design Temperature: 140℃ Steam Sterilization: In-situ / Autoclave@121℃/30min
Housing Body: 304 Or 316L Vent / Drain: 304 Or 316L
Clamp: 304 Leg: 304
O-ring/ Gaskets: Silicon, Viton, EPDM, PTFE Body Connection: Tri-clamp, Strengthened Clamp
Inlet/ Outlet: 1inch(DN 25) Clamp Vent: 4mm Can Connect With 8mm Tube
Drain: 4mm Can Connect With 8mm Tube Pressure Gauge: 1.5 Inch Tri-clamp
High Light:

Single Round Stainless Steel Filter Housing


DN25 Stainless Steel Filter Housing


DN25 ss cartridge filter housing

Product Description

Single-Round Sanitary Housings Mirror polish 304 Stainless Steel Filter Housing
General Description
P-SCF The series single-Round liquid filter housing is a small flow high-end single-round filter housing without any cleaning dead angle. Its design
fully meets the requirements of sanitary and GMP, the structure has no sanitary dead corners, and it is easy to clean; it drains thoroughly without
worrying about residual liquid.

  • Food & beverages
  • Dyes & Intermediates
  • RO Pre filtration
  • Pharmaceuticals
  • Bore Well water
  • Processing Chemicals
  • Dairy Petroleum Derivatives
  • Paints & Inks
  • Coolants
  • Water Treatment

Features and Benefits


•Using sanitary design, no dead ends, and lowest sewage discharge design, the filter is easy to clean and no residual liquid;


• Ultra-high polishing accuracy, the inner wall can be polished 0.3μm, the outer wall can be polished 0.4μm, electrolytic polishing can be selected;


•Using new segmented clamps to enhance the sealing performance and withstand higher pressure;


•The bracket is equipped with an adjusting nut to adjust the height of the filter, which is convenient to use.



Housing ConnectionStrengthened clamp
In-outletFast loading
VentQuick release valve
DrainQuick release valve
Pressure Gauge1.5 inches clamp

Surface Treatment

Polish TypeMirror polish or Electro-polished
Polishing AccuracyInternal Ra: 0.3μm or External Ra: 0.4μm

DN25 Single Round Stainless Steel Filter Housing GMP Standard 0
DN25 Single Round Stainless Steel Filter Housing GMP Standard 1


GB, American Standard, German standard, Japanese standard, customized; single bag, parallel bag, multi-bag, cartridge


S, T series, PBF polypropylene containers etc.,

Working pressure



304, 316L

Working temperature


Filtering accuracy


Operation mode

Manual or automatic control cylinder

High-strength support basket

by uniform pore size of high-strength stainless steel mesh manufacture of 3.5mm;

Inlet and outlet

1-14 inch; customized as request

Inlet and outlet Location

Side into and side out, side into and bottom out, top into and bottom out, top into and side out; customized as request

Interface Type

flange, screw thread or customized

Filtration precision

1-800um (microns) relative or absolute precision

Seal ring material categories

general nitrile rubber, Teflon, nylon, Te Fulong acid such as high temperature and high-performance specialty materials


Contact Details

Phone Number : 86-21-57718597

WhatsApp : +8615221512089