|
Product Details:
|
| OD: | 2.7"(68.5mm) | Length: | 10", 20", 30", 40" |
|---|---|---|---|
| Filter Medium: | PP | Filtration Rating: | 0.1um, 0.22um, 0.45um, 1um, 2um, 5um, 10um, 20um, 30um, 50um, 60um |
| Flow Rate: | 1.2m³/h/10" | MOQ: | 1 Piece |
| Highlight: | ro filter cartridge,high flow water filter cartridge |
||
5 Micron PP Pleated Filter Cartridge For Inkjet Filtration Length 10"/20"/30"/40"
General Description
PLZ series pleated filter cartridges are designed with single piece support of center core and outer cage which increased the intensity of the filter cartridges.Which also increases the filtration area of the filter and life.
Material structure
| Filter medium | Polypropylene (PP) |
| Support/Drainage | Polypropylene (PP) |
| Core/Cage/End Cap | Polypropylene (PP) |
| O-ring & gaskets seals | NBR, Silicone, EPDM, Viton |
Specifications
| Item | Technical Parameters |
| Micron | 0.1um, 0.22um, 0.45um, 1um, 2um, 3um, 5um, 10um, 20um, 30um, 60um |
| Filtration area | 0.4-0.7m² |
| Outside diameter | 2.7" (68.5mm) |
| Max. operating differential pressure | ΔP≤0.35MPa at25℃ |
| Max. operating differential pressure (reverse direction) | ΔP≤0.28MPa at60℃ |
| Max. operating temperature | 80℃(Stainless steel support is recommended for temperature exceeds 50℃) |
| Sterilization temperature | 30 minute cycles @121℃ |
| Flow rate | 1.2m³/h/10" |
Performance
| Max. operating temperature | 80℃ |
| Max. operating pressure | 4bar/21℃ |
| 2.4bar/80℃ | |
| Mosit-heat sterilization | 121℃/30min |
| Hot water sterilization | 85℃/30min |
Applications:
• Single-piece cage and core construction
• Excellent chemical compatibility. Suitable for filtration of kinds of liquids.
• Pleated design increased the filtration area.
• low pressure drop, long service life
• Full range of removal ratings
• Graded pore density for high dirt holding capacity.
• FDA compliance material
FAQ
1. What's about the sample cost?
Sample is free, you just need to pay for the freight cost.
2. What's about the MOQ?
Mostly kinds of filter cartridges MOQ is 1 piece, some special type filters can be negotiated.
3. How about the delivery?
The goods will be arranged in 7-10 working days after pre-payment confirmed. Urgent requirment, can be negotiated.
4. How is the feed back from customer ?
Our customers are all over the world and get goof feedback from them. They always choose us because of the good products quality and service.
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314
