|
Product Details:
|
| Diameter: | 6" (152.4mm) | Filtration Micron: | 1um~100um |
|---|---|---|---|
| Filter Media: | Polypropylene (PP) | Length: | 20"(508mm), 40"(1016mm), 60"(1524mm) |
| Maximum Operating Temperature: | 82℃ | Maximum Operating Differential Pressure: | 3.5bar@21℃ (Inside To Outside) |
| Suggestion Pressure For Filter Replacement: | 2.5 Bar @ 20℃ | Flow Rate: | 60m³/h |
| Filtration Area: | 6.4㎡ | Filtration Direction: | Inside To Outside |
| Highlight: | Absolute pleated filter element,Absolute 1 micron cartridge,6" pleated filter element |
||
Absolute Rating 1 micron OD 6" Length 40" PP Desalination High Flow Filter Cartridge
General information
PHFl series high flow filter cartridge adopts 6" (152.4mm) large diameter structure with single open end. The filter body is divided into two types: PP pleated and melt blown. All connection use thermal welding, no any adhesive, has wide Chemical compatibility, can be applied to food and beverage filtration.
Material Construction
| Filter Media | PP: Deep Pleated PP/Melt PP | FO: Organic Fiber | GF: Resin Synthetic Glass Fiber |
| Support/Drainage | PP | Organic Fiber | Polyester |
| End Cap Material | Fiberglass Reinforced Polypropylene | Fiberglass Reinforced Polypropylene | Fiberglass Reinforced Polypropylene |
Performance
| Maximum Operation Temperature |
PP: 82℃ FO: 120℃ GF: 121℃ |
| Maximum Operation Differential Pressure |
PP: 3.44bar / 21°C FO: 3.44bar / 120°C GF: 3.44bar / 121°C |
Flow Rate and Filtration Area
|
Size (Diameter*Length) |
Design Flow (m3/hr) |
Maximum Flow (m3/hr) |
Filtration Area (㎡) |
| 6"*20" | 15 | 40 | 2.6 |
| 6"*40" | 30 | 80 | 5.2 |
| 6"*60" | 45 | 120 | 7.8 |
Performance comparison
Comparison chart of specific filter element number and corresponding filter footprint.
Product Features
1) Large Filtration Area, High Throughput
With unique pleat technology, filtration area can reach 3.2㎡/20 inch.
40" high flow filter flow rate is more than 60m³/h under standard conditions. Achieve high throughput and long service life.
2) Multiple membrane material options
Membrane materials: PP and PTFE. The PP membrane material adopts unique multi-layer Nano fiber pleated technology to achieve a gradient filter structure, increase the dirt holding space, and significantly extend the service life, thereby reducing the replacement frequency and system cost.
Global Customers
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314
