Product Details:
|
PHFk: | High Flow Filter Cartridge | Filtration Micron: | 1um, 2um, 5um, 10um, 15um, 20um, 30um, 50um, 70um, 100um |
---|---|---|---|
OD: | 6" (152.4mm) | Material: | PP |
Filtration Efficiency: | Beta 5000 | Length: | 40"(1016mm) |
Filter Area: | 6.6㎡ | Flow Rate: | 35m³/hr |
Maximum Operating Differential Pressure: | 3.5bar@21℃ | Maximum Operating Temperature: | 82℃ |
High Light: | 40inch High Flow Filter Cartridge,40inch pleated media filter,99.8% High Flow Filter Cartridge |
Absolute 5um 99.8% efficiency High Flow Filter Cartridge 40" PP Pleated Type OD 6" Single O-ring
General information
PHFK series high flow filter cartridge is made of 6" (152.4mm) diameter, material: PP, Organic fiber and Glass fiber, end caps material use glassfiber reinforced PP. Bigger diameter provide bigger filtration area, high flow rate, high dirt holding capacity and longer use life.
Performance comparison
Comparison chart of specific filter element number and corresponding filter footprint.
Material Construction
Filter Media | PP: Deep Pleated PP/Melt PP | FO: Organic Fiber | GF: Resin Synthetic Glass Fiber |
Support/Drainage | PP | Organic Fiber | Polyester |
End Cap Material | Fiberglass Reinforced Polypropylene | Fiberglass Reinforced Polypropylene | Fiberglass Reinforced Polypropylene |
Flow Rate and Filtration Area
Size (Diameter*Length) |
Design Flow (m3/hr) |
Maximum Flow (m3/hr) |
Filtration Area (㎡) |
6"*20" | 15 | 40 | 2.6 |
6"*40" | 30 | 80 | 5.2 |
6"*60" | 45 | 120 | 7.8 |
Filter Performance
Micron | 1um, 3um, 5um, 10um, 15um, 20um, 50um, 70um, 100um |
Max. operating temperature | 82℃ |
Max. operating differential pressure | 3.44bar@82℃ |
Suggestion pressure for filter replacement | 2.5Bar@20℃ |
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314