|
Product Details:
|
| Length: | 20''/40''/60'' | Diameter: | 6'' |
|---|---|---|---|
| Material: | PP/PET/GF | Micron: | 0.1Um-100Um |
| Max. Operating Temperature: | 121℃ | Suggestion Design Flow: | 40'': 18-25m³/h |
| Suggestion Max Flow: | 40'': 78m³/h | Suggestion Pressure For Filter Replacement: | 2.5Bar@20℃ |
| Flow Type: | Inside To Outside | Support: | Outer Belt/PP Outer Cage/Polyester Mesh |
| High Light: | 0.1Um High Flow Filter Cartridge,40m3/H High Flow Filter Cartridge,0.1Um water filter cartridge |
||
PHF series high-flow filter cartridge adopts 6" large diameter structure with single open end. The filter body is divided into two types: pp pleated and melt blown. All connection use thermal welding, no any adhesive, has wide Chemical compatibility, can be applied to food and beverage filtration.
PHFLH series high temperature resistant high flow filter cartridge adopts 6" large diameter structure, single open end, no center core, outer cage is made of 304 stainless steel, filter material and support layer are made of high temperature resistant materials, which can be long-term under the condition of 120℃ use.
Material Construction
| Filter Media |
PP:Deep Pleated PP/ Melt PP |
FO:Organic Fiber | GF:Glass Fiber/Polyester |
| Support/Drainage | PP | Organic Fiber | Polyester |
| End Cap Material | Fiberglass reinforced polypropylene | Fiberglass reinforced polypropylene | Fiberglass reinforced polypropylene |
Performance
| Maximum Operation Temperature |
PP:82°C FO:120℃ GF:121℃ |
| Maximum Operation Differential Pressure |
PP:3.44bar / 21°C FO:3.44bar / 120°C GF:3.44bar / 121°C |
Flow Rate and Filtration Area
|
Size (Diameter*Length) |
Design Flow (m3/hr) |
Maximum Flow (m3/hr) |
Filtration Area (㎡) |
| 6"*20" | 15 | 40 | 2.6 |
| 6"*40" | 30 | 80 | 5.2 |
| 6"*60" | 45 | 120 | 7.8 |
Ordering Information
PHF L PP 0500 40 G V
| Series | Type | Media | Micron | Length | Structure | Seal Material | End Cap Type | |||||||
| PHF | L | PP | 0010 | =0.1μm | 1500 | =15μm | 20 | =20" | G | =PP Outer Cage | V | =Viton | ZA | =Single-Ring(HFK) |
| LH | PBT | 0100 | =1.0μm | 2000 | =20μm | 40 | =40" | M | =Melt blown | S | =Silicone | ZB | =Double-Ring(HFK) | |
| K | GF | 0500 | =5.0μm | 4000 | =40μm | 60 | =60" | S | =Plastic net | E | =EPDM | ZA | =一Type(HFM) | |
| M | 1000 | =10μm | 7000 | =70μm | ZB | =十Type(HFM) | ||||||||
| 1000 | =100μm | None | =(HFL/HFLH) | |||||||||||
Contact Person: William
Tel: 86-21-57718597
