|Surface Option:||Internal Ra:0.3um/ External Ra:0.4um||Polish Type:||Mirror Polish Or Internal Electro-polished|
|Max. Operating Pressure:||0.6MPa(6bar) / 1.0MPa(10bar)||Max. Operating Temperature:||90℃/ Design Temperature: 140℃|
|Body Connection:||Swing Bolt / C-Clamp||Inlet/ Outlet:||Flange|
|O-ring/ Gaskets:||Silicon, Viton, EPDM, PTFE||Pressure Gauge:||M14*1.5|
|Housing Body:||304 Or 316L||Vent / Drain:||304 Or 316L|
|Clamp:||304 Or 316L||Material:||304 Or 316L|
|Leg:||304 Or 316L|
316L Top Inlet Bag filter housing,
316L SS water filter housing,
5um SS water filter housing
P-TBF Top-Inlet Bag Filter Housing #1Bag #2 Bag Mirror polishing Ra:0.6um filter housing
JDX150 high flow series filter housing used with JDX150 high flow filter cartridge. It is mainly used in some high flow occasions, especially in the field of water treatment.The diameter of the JDX150 filter cartridge is 6"/150mm, the filtration area of a single filter cartridge can reach 6m2, and the maximum flow rate is 60m3/h.JDX150 is available in two types: vertical and horizontal. Conventional 10-core-40 inch filters usually use vertical filter housing; for medium and large systems with more than 1000 tons of water per hour, horizontal structure can be selected. The 60-inch filter cartridge is used to meet the high flow rate and is easier to replace.
Features and Benefits
• Mirror polishing is used inside and outside, and the material-liquid contact surface reaches 0.6μm, which is close to sanitary requirements;
•Using the form of multiple drain valves up and down the faceplate, draining quickly and conveniently;
•The filter cartridge seal adopts spring type seal, which is easy to operate.
Features and Benefits
•Using sanitary design, no dead ends, and lowest sewage discharge design, the filter is easy to clean and no residual liquid;
• Ultra-high polishing accuracy, the inner wall can be polished 0.3μm, the outer wall can be polished 0.4μm, electrolytic polishing can be selected;
•Using new segmented clamps to enhance the sealing performance and withstand higher pressure;
•The bracket is equipped with an adjusting nut to adjust the height of the filter, which is convenient to use.
|Housing Connection||Strengthened clamp|
|Vent||Quick release valve|
|Drain||Quick release valve|
|Pressure Gauge||1.5 inches clamp|
|Polishing Type||Mirror polishing/sandblasting|
|Polishing Accuracy||Internal Ra 0.6μm/Outer wall 0.8μm|
|Max. Operating Temperature||130℃|
|Sterilization Method||Online or sterilization cabinet:121±2℃ 30min/times|
|Polish Type||Mirror polish or Electro-polished|
|Polishing Accuracy||Internal Ra: 0.3μm or External Ra: 0.4μm|
|Specification||#1 Bag (Size 1)||#2 Bag (Size 2)|
|A: Total Height (Without Pressure Gauge)||788||1108|
|B: Center Distance of Inlet||280||280|
|D: Inlet Height From The Ground||743||1063|
|E: Exit Height||150||150|
Filter Bag Size
|#1 Bag (Size 1)||180*430mm|
|#2 Bag (Size 2)||180*810mm|
#1 or #2 size Filter Bag housing. Side Entry Swing Bolt Closure. 304 Stainless Steel with 2" NPT connections.Non-code 150 psig rating. FSB-S series, side entry stainless steel single bag filter housing provides economical filtration options with a wide range of applications in the craft food & beverage industry.
The side inlet promotes more uniform flow rate delivering improved filtration results. The FSB-S series is designed with a proven swing eye bolt closure to ensure sealing. The FSB-S series filter housing is constructed of 304 Stainless steel material, and its fine finish gives excellent resistance of corrosion for purity.
FSB-S series has adjustable legs which provide flexibility for installation orientation and height.
150 psig, Side Inlet Filter Bag Housings Offer Durability and Flexibility in a Wide Range of Applications
|Code||Filter Bag Number||Filter Bag Model||Filter Material||Housing Connection||Inlet / Outlet||Sealing Material||Surface Treatment||Design Pressure|
|P-TBF||01 (1 Bag)||A (#1 Bag)||
|S (Silicone)||M (Mirror Polish)||Z (0.6MPa)|
|B (#2 Bag)||L (316L)||F80||V (Viton)||E (Electro- polished)|
|F125||E (EPDM)||P (Abrasive Blasting)|
Contact Person: Lucy