|
Product Details:
|
| Highlight: | Pleated dust filter cartridge,High-efficiency dust removal cartridge,Customizable industrial filter cartridge |
||
|---|---|---|---|
Industrial Dust Filter Cartridge for Air Dust Removal & Aeration Machines
Dust Filter Cartridge for Industrial Dust Collection and Aeration Equipment — a pleated cylindrical element with a rigid metal core, built for high-efficiency fine dust capture at high airflow. Large pleated surface area inside a compact cartridge body means lower pressure drop, higher dust-holding capacity and longer intervals between cleaning and replacement.
The dust filter cartridge is designed for high-efficiency dust removal in industrial dust collectors, air cleaning systems, aeration machines, blowers and ventilation equipment. It uses pleated filter media arranged in a cylindrical cartridge inside a rigid frame or metal core. This design provides a large filtration area within a relatively compact installation space, making it suitable for systems that require high airflow and better fine dust capture performance.
![]()
Compared with a traditional bag filter, the pleated dust filter cartridge provides a more rigid structure and a higher filtration area. It is normally used at the medium-to-high efficiency or final filtration stage, depending on the filter media and efficiency grade. In practical applications, it can be installed after a pre-filter to remove fine dust and airborne particles before the air enters production areas, dust collectors or sensitive equipment.
Dimensions, filter media, frame material, end caps, gaskets, efficiency grade and airflow can be customized according to the application.
Dust-laden air enters the cartridge from the outside and passes through the pleated media, leaving the dust on the outer surface while clean air travels through the open pleat channels to the inner core and out to the clean-air side. Because the media is folded rather than flat, the same cartridge envelope can carry several times the filter surface of a plain cylindrical sleeve.
A metal core (galvanized steel, stainless steel or aluminium) supports the pleats against the pressure difference, and hot-melt or embossed pleat separators keep the channels open so that air flows evenly across the whole surface instead of concentrating in one area. Even distribution is what prevents local media damage and keeps the pressure-drop curve predictable over the service cycle.
In pulse-jet dust collectors, the cartridge is cleaned online: a short compressed-air pulse is released into the clean-air side, the pleats flex outward and the dust cake falls into the hopper. The cartridge then returns to service without being removed. The efficiency of this cleaning cycle depends on media surface treatment — for example PTFE membrane or a smooth anti-static finish — and on the air-to-cloth ratio the collector was designed for.
For systems with higher cleanliness requirements, the dust filter cartridge can also be used before a final HEPA filter to reduce the dust load and help extend HEPA filter service life.
Dust filter cartridges are commonly used in industrial dust collection systems, cartridge dust collectors, baghouses, aeration machines, blowers, air handling units and other facilities where air dust removal and fine particle filtration are required.
Aeration blowers and process air intakes deserve particular attention: dust drawn into the blower not only contaminates the process air but also builds up on impellers and diffusers, which gradually reduces output and increases vibration. A correctly sized pleated cartridge on the intake protects the machine with a much smaller footprint than a bag filter house.
| Parameter | Specification |
|---|---|
| Product Name | Dust Filter Cartridge / Pleated Dust Filter Cartridge |
| Filter Type | Pleated / Cylindrical / Cartridge |
| Filter Media | Polyester, PTFE, Anti-static, Flame Retardant, Cellulose, Synthetic Fiber or Customized |
| Frame / Core Material | Galvanized Steel, Stainless Steel, Aluminum, Plastic or Customized |
| Structure | Pleated Cylindrical with Metal Core |
| Efficiency Grade | Customized |
| Typical Efficiency | MERV 8-15, F7-F9, H10-H12 or Customized |
| Filter Size | Outer Diameter, Inner Diameter, Length Customized |
| Airflow | According to Filter Size and Efficiency |
| Main Function | Dust and Fine Airborne Particle Removal |
| Installation | Dust Collector, Aeration Machine, Blower, Ventilation System |
| Application | Industrial Dust Collection, Air Dust Removal, Woodworking, Cement, Laser Cutting, Welding, Powder Recovery, Pharmaceutical, Food and Beverage |
| End Cap Type | Open / Closed, with or without Gasket, Customized |
| Gasket / Seal | EPDM, NBR, Silicone or Foam Gasket |
| Pleat Type | Mini-Pleated or Deep-Pleated, Pleat Count Customized |
| Cleaning Method | Pulse-Jet Compressed Air, Manual Air Cleaning or Replaceable |
| Efficiency Standard | ASHRAE 52.2 (MERV), EN 779, ISO 16890 or EN 1822 on Request |
| Packaging | Export Standard Packaging, Carton with Inner Protection |
Filtration area, pleat count, media weight and end-cap geometry are project-specific. Please confirm the collector model, mounting hole pattern and required efficiency grade before ordering so that the cartridge fits the existing installation without modification.
| Media Option | Best Suited To |
|---|---|
| Polyester (standard) | General industrial dust, woodworking, grinding and powder handling; good dust release and economical replacement cost. |
| PTFE membrane | Fine, sticky or hygroscopic dust such as welding fume, laser cutting fume and powder coating overspray; surface filtration gives easier cake release and lower residual pressure drop. |
| Anti-static | Combustible dusts, powder handling and any process where static discharge is a risk. |
| Flame retardant | Welding, metal processing and hot-particle applications where sparks may reach the filter. |
| Cellulose / synthetic blend | Dry, non-aggressive dust where a lower-cost disposable element is acceptable. |
Filter condition should be judged by differential pressure, not by appearance. Record the clean pressure drop after installation, and service the cartridge when the reading rises to the level recommended for the collector — commonly around two to three times the initial value, or the limit set by the fan and airflow requirements.
For pulse-jet collectors, confirm the compressed-air pressure, pulse duration and pulse interval against the media specification. Over-cleaning with excessive air pressure shortens media life, while under-cleaning allows the dust cake to become compacted and permanently reduces airflow.
Never strike, roll or water-wash a pleated cartridge unless the media has been specified for wet cleaning; mechanical action damages the pleat geometry and the fine fibre structure, and efficiency can drop sharply even though the cartridge looks clean.
Q1: What is a dust filter cartridge used for?
It is mainly used for dust removal and fine particle filtration in industrial dust collectors, air cleaning systems, aeration machines, blowers and ventilation equipment. It captures dust and airborne particles to protect downstream equipment and improve air quality.
Q2: What is the difference between a dust filter cartridge and a bag filter?
A bag filter uses flexible filter bags, while a dust filter cartridge uses pleated media packs or cylindrical pleated media. The cartridge design usually provides a larger filtration area in a compact space and can be selected for higher efficiency grades and higher airflow applications.
Q3: Can this filter be used in aeration machines?
Yes. It can be used in the air intake or exhaust filtration of aeration machines, aeration blowers and similar equipment to reduce dust and particles. The correct size, media and efficiency should be selected according to the machine and working environment.
Q4: Can it be used for air dust removal?
Yes. It is widely used for air dust removal in industrial workshops, dust collectors, powder recovery systems and ventilation equipment.
Q5: What efficiency grades are available?
The filter can be supplied in different efficiency grades, such as MERV 8-15, F7-F9, H10-H12, or according to ISO 16890 / EN 1822. The correct grade should be confirmed according to the required air cleanliness and application.
Q6: Why is the filter designed in a pleated shape?
The pleated design increases the amount of filter media that can fit inside the frame. This gives the filter a larger effective filtration area, higher dust-holding capacity and better airflow performance than a simple flat filter.
Q7: Where is this filter normally installed?
It is normally installed inside a dust collector, cartridge dust collector, aeration machine, blower, ventilation unit or air handling system. Common positions include after a pre-filter and before the clean air exhaust.
Q8: Can the size be customized?
Yes. Outer diameter, inner diameter, length, pleat number, media, frame material, end caps, gaskets and efficiency grade can be customized according to the existing equipment.
Q9: How do I know when the filter needs replacement?
Replacement is normally determined by differential pressure, airflow and system requirements. As dust accumulates, the pressure drop across the filter increases. When it reaches the recommended final pressure drop, the filter should be replaced.
Q10: Can this filter be used in pharmaceutical or food factories?
Yes. It can be used in dust collection and air filtration systems in pharmaceutical, food and other controlled production environments. The filter media and construction should meet the required cleanliness and industry standards.
Q11: What information is needed for quotation?
Please provide the filter dimensions, outer diameter, inner diameter, length, required efficiency grade, airflow, frame material, end cap type, operating environment and quantity. If replacing an existing filter, a photo, model number or pressure-drop requirement can also help with selection.
Q12: Is this filter washable?
Some dust filter cartridges can be cleaned by compressed air or washing, depending on the filter media and application. However, most high-efficiency cartridges are designed as replaceable filters. Cleaning may damage the filter media or change its filtration performance, so replacement is normally recommended once the final pressure drop is reached.
Shanghai Pullner Filtration Technology Co., Ltd.
Established: 2013
Shanghai Pullner Filtration Technology Co., Ltd., established in 2013, is a professional manufacturer of filter cartridges and filtration solutions.
With a 15,000m² production facility, 20+ production lines, advanced testing laboratories, and experienced R&D teams, Pullner provides high-performance filtration products for Microelectronics, Biopharmaceuticals, Food & Beverage, Petrochemical, Water Treatment, Power Generation, and other industries.
Certified with ISO 9001, ISO 14001, and ISO 45001, Pullner is committed to delivering reliable and innovative filtration solutions to customers worldwide.
Q1: Who is the manufacturer and brand?
Manufacturer: Shanghai Pullner Filtration Technology Co., Ltd. / Brand: Pullner.
Q2: Can you provide samples?
Yes. We can provide 1-2 free samples for evaluation. Buyers only cover shipping. (Free samples are typically supported for future formal orders.)
Q3: What is the delivery time?
Usually 5-10 working days for standard products, depending on order quantity.
Q4: Is the filtration rating nominal or absolute?
Standard products are nominal. Absolute-rated filters can be customized based on your application.
Q5: Which brands can your filters replace?
Compatible replacements include major brands such as PALL, 3M, PARKER, and others.
Q6: What is the MOQ?
Standard MOQ is 1 piece (factory direct). For certain models or customized specs, MOQ may vary.
Contact Person: Hudarm
Tel: 86-18311506837
Fax: 86-021-57711314
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews