|
Product Details:
|
| OD: | 2.7" (69mm) | Filter Media: | PES |
|---|---|---|---|
| Filtration Rating: | 0.1um, 0.22um, 0.45um, 0.65um | Length: | 10", 20" |
| Interception Rate: | 100%, 107CFΜ/cm² | Max. Operating Temperature: | 80℃ |
| High Light: | water filtration cartridges,ro membrane cartridge |
||
0.1um 0.22um 0.45um PES Pleated Membrane Filter Cartridge for Pharmaceutics
General Description
The PES filter element is made of imported hydrophilic asymmetric PES membrane and imported non-woven fabric and mesh as the support layers. Its asymmetric membrane structure enables the filter to greatly extend the service life of the filter while ensuring the filtration efficiency, thereby effectively saving the filtration cost of the system. The filter outer cage, center core and end cap are formed by thermal welding technology, no adhesive used. They are produced in clean room, 100% integrity tested and flushed with high purity water. Suitable for filtration of weak acid/alkali liquids and high purity water.
Applications
Pharmaceutics
Food and beverage
Chemical industry
Features
Excellent performance of chemical compatibility
Hydrophilic membrane with high flow
Non-fiber releasing according to pharmaceutics and food industry requirements
Experiencing 100% integrity tested
Flushed with ultrapure water
FDA compliance material
Specification
Dimensions
Outer diameter: 2.7" (69mm)
Length: 10", 20", 30", 40"
Material of Constructions
Filter Medium: PES
Support layer: PP
Cage/Core/End cap: PP
Seal Material: Silicone, EPDM, NBR, Viton, Teflon, E-fkm
Performance
Removal rating: 0.1um, 0.22um, 0.45um, 0.65um
Maximum operating temperature: 80℃
Max. operating pressure: 4.2 Bar @ 25℃
Max. operating pressure (Reverse Direction): 2.1 Bar @ 25℃
Max. temperature sterilization: 20 times, 30minutes cycles at 121℃
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314
