|
Product Details:
|
| Material: | PVDF | OD: | 2.7" (69mm) |
|---|---|---|---|
| Micron: | 0.1um, 0.22um, 0.45um | Length: | 10", 20", 30", 40" |
| Sample: | Yes | OEM: | Yes |
| Highlight: | pall capsule filter,pp pleated filter cartridge |
||
PVDF Membrane Microporous Pleated Filter Cartridge Microelectronics Filter 0.22um
General Description
The PVDF Pleated filter cartridge is constructed of imported natural hydrophobic Polyvinylenedifluoride (PVDF) membrane media and non-woven support materials. Adaptors are thermally welded with media without using any glue on it, so there is no possibilities to cause pollution.
Applications:
1. High purity gas in the electronics industry;
2. Clean gas for aseptic packaging;
3. Steam filtration;
4. Oxidizing liquid and gas sterilization filtration;
5. Petroleum industry;
Features
1. Natural hydrophobic product suitable for gas filtration;
2. The modified membrane is hydrophilic and suitable for liquid filtration;
3. Wide applicability, PH range 1-13;
4. With high temperature and oxidation resistance;
5. Small differential pressure, large flow and long service life;
6. Each filter is rinsed with high purity water before leaving the factory.
Dimensions
| Outer diameter | 2.7" (69mm) |
| Length | 10", 20", 30", 40" |
Material of Construction
| Model | Membrane Pleated Filter |
| Filter Medium | PVDF |
| Support/Drainage | Polypropylene |
| Center core/Outer Cage/End Caps | Polypropylene |
| Seals Material | NBR, Silicone, EPDM, Viton |
Filter Performance
| Micron | 0.1um, 0.22um, 0.45um, 0.65um |
| Length | 10", 20" |
| Interception rate | 100%, 107CFΜ/cm² |
| Max. operating temperature | 80℃ |
| Max. operating differential pressure | 0.42Mpa at 25℃ |
|
Max. operating differential pressure (Reverse direction) |
0.21Mpa at 25℃ |
| Applicable PH | 1-14 |
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314